Sold/Found Need Help with Mini-14 reassembly

Status
Not open for further replies.

kenny1773

Established Member
Nov 28, 2018
323
316
Birmingham
from the manual

3. Final reassembly of rifle:

a. Replace stock by inserting its front end into the gas block at a slight angle. When the stock is correctly seated into the gas block, the stock can be swung down into full contact with the receiver.

b. Insert the opened trigger housing assembly, safety “ON”, into the stock (the hammer must be cocked prior to insertion). When fully seated, swing the trigger guard fully into place until it locks shut. An audible “click” will be heard when it is correctly locked. Cycle the slide handle and safety a few times to be certain the components are correctly assembled. Put the safety back “ON”.

c. Reinsert an empty magazine and fully withdraw slide. The bolt should lock open automatically.
 

saltysam

Established Member
Sep 8, 2020
26
6
montgomery al
from the manual

3. Final reassembly of rifle:

a. Replace stock by inserting its front end into the gas block at a slight angle. When the stock is correctly seated into the gas block, the stock can be swung down into full contact with the receiver.

b. Insert the opened trigger housing assembly, safety “ON”, into the stock (the hammer must be cocked prior to insertion). When fully seated, swing the trigger guard fully into place until it locks shut. An audible “click” will be heard when it is correctly locked. Cycle the slide handle and safety a few times to be certain the components are correctly assembled. Put the safety back “ON”.

c. Reinsert an empty magazine and fully withdraw slide. The bolt should lock open automatically.
Thanks for your help, Kenny. Salty.
 
Last edited:

kenny1773

Established Member
Nov 28, 2018
323
316
Birmingham
Based off the initial question, I thought maybe you needed the instructions.

Can you view youtube video? Here is how to put it back together, maybe going back to step one and reassembling again will get it



It has been a while since I have had mine apart
 
Status
Not open for further replies.
Top