SouthernGunner13
Established Member
So here's the deal, I acquired this AR10 barrel and handguard in a trade with the intentions of building an AR10. However, a tragedy has taken place in my family and I could use a little extra funds to go out of town for the funeral.
With that being said, I don't know the exact value of these parts so if it's too high please don't crucify me.
The barrel is a 16" DPMS 1/10 twist AR10 chambered in 7.62x51. I can tell it's been used due to the carbon on it. However, the rifling appears strong with little wear.
The Troy Industries handguard appears to be around 7" long with the "T" markings. The original screws were missing but I found a set that works.
If anyone has any questions I'll try to answer but I can't find a lot of info on either of these items.
With that being said, I don't know the exact value of these parts so if it's too high please don't crucify me.
The barrel is a 16" DPMS 1/10 twist AR10 chambered in 7.62x51. I can tell it's been used due to the carbon on it. However, the rifling appears strong with little wear.
The Troy Industries handguard appears to be around 7" long with the "T" markings. The original screws were missing but I found a set that works.
If anyone has any questions I'll try to answer but I can't find a lot of info on either of these items.
