Polymer 80 builds and builders

[NyetRifleisfine]

Y’all got any builds? How many builder do we have on here? Just looking for advice and tips.

 

[kenny1773]

Best advice, go slow, avoid power tools (except for the drill to drill the pin holes) Use xacto knives, wire snips (various types) files, sandpaper
understand what needs to be removed and don't remove any more

There are a few good videos out there on how to, but will warn you there are lots of not so good videos too
Here is a good one 'the channel'



Jonny Glock and a few others have some good information on the trigger (youtube screwing up the really good videos)

 

[DB35114]

I picked up the lower on this group it was already finished though and slide but put slide together after buying sights and optic not much real work to assemble it,I have a Glock 43 lpk if I can find a decent priced p80 lower I would like to give it a go myself on finishing the lower

 

[NyetRifleisfine]

I’ve got two I’ve yet to build, got everything I would need

 

[kenny1773]

Go slow, take your time.

I recommend not using a dremel tool for anything

When you drill the pin holes, just drill them through once, do not run the bit in and out of the hole multiple times.

Drill on, run it in, pull it out, drill off

If you have other questions, I will do my best to answer or point you to a guide I agree with.

It really isn't hard to do, but it is easy to make a careless mistake and screw yourself.